Common Rail Diesel Injector Cleaner
| EAN : 3266702011554 |
|---|
| Product number: : 1155B |
| Bardahl Diesel Injector Cleaner contains a careful formulation of special solvents and cleaning agents that clean and maintain the atomizers without disassembling them. |
Tailored Advice
Common Rail Diesel Injector Cleaner
| Attribute | Description | |
|---|---|---|
| Cleansing and Protection: | Cleans and protects the complete injection system, including valves, fuel pump and lines. | |
| Cetane number increase: | Increases the cetane number of diesel fuel and improves engine acceleration. | |
| Prevention of Pollution: | Prevents contamination of injectors and fuel pump by removing moisture from the fuel. | |
| Fuel consumption reduction: | Reduces fuel consumption thanks to anti-friction properties. | |
| Engine noise reduction: | Due to the effectiveness of the lubricating properties, acoustic emissions from the engine compartment are reduced. | |
| Neutralizes Smoke Formation: | Smoke formation is neutralized and helps tune the engine to meet environmental requirements. |
Instructions for use:
Pour the contents of this can into 20 liters of diesel fuel, drive a short distance and fill up your fuel tank.
Recommendation: repeat the treatment every 5,000 km and in any case before a general periodic inspection.
OOK INTRESSANT VOOR U
Top Oil
Attribute
Description
Lubrication and Protection:
Lubricates and protects the upper part of the piston and keeps the fuel system clean. Ideal for fuels such as E10 petrol, LPG, natural gas and (bio) diesels.
Reduces Engine Problems:
Prevents power loss, oil consumption and wear caused by carbon and varnish deposits on piston rings, cylinder walls and valves.
Cleansing Effect:
Softens carbon and gum deposits, causing them to dissolve over time and burn with the fuel.
Compatibility:
Suitable for all engines, including those equipped with catalytic converters & particulate filters meet the strict EUR6 standard.
Availability:
Available in different packages: 500 ml, 5 liters, 25 liters, 60 liters, and 210 liters.
Instructions for use:To be added at a ratio of 1:1000 (25ml Top Oil per 25 liters of fuel). Self-mixing in the tank. First add Top Oil, then refuel.
XTC Turbo 15W40
Contents:
1 Liter
Bardahl Oil
Finder
Would you like to
know which type of motor oil is suitable for your car? Go to the Bardahl Oil finder.Note: Follow the manufacturer's instructions at all times, which can be found in your service book
Cooling Fluid G12+ -38C
Contents:
1 Liter
ApplicationBardahl longlife Cooling Fluid -38°C G12+ offers superior engine protection with its advanced Organic Acid Technology (OAT), ensuring long-lasting defense against frost and corrosion for over 700,000 km or 8,000 hours. This eco-friendly, silicate-free formula is designed for modern engines, providing enhanced heat transfer and cavitation protection while being compatible with major vehicle brands. It's the preferred choice for maintaining optimal engine performance with minimal maintenance.
XTC LSP 5W30 Syntronic Longlife III
Contents:
1 Liter
Bardahl Oil
Finder
Would you like to
know which type of motor oil is suitable for your car? Go to the Bardahl Oil finder.Note: Follow the manufacturer's instructions at all times, which can be found in your service book.
Glass Cleaner Bio
Contents:
500 ML
Attribute
Description
Versatile Cleaning:
Bardahl Glass Cleaner is suitable for car windows, mirrors, headlights and glass objects such as coffee or dining tables, toilet mirrors. It effectively removes lipstick, grease, insects and other contaminants.
Safe for Surfaces:
Suitable for cleaning chrome and enamelled surfaces without leaving residues. Safe for use on rubber and paint.
Foaming Formula:
The foaming action prevents rapid slipping on sloping or vertical glass, allowing for thorough cleaning.
Packaging sizes:
Available in 500 ml (with hand sprayer), 5 liter and 25 liter packages to meet different needs and applications.
Product Safety Data:
Detergent details are available on this product's Safety Data Sheet (SDS).
Instructions for useSpray at a distance of 15-20 cm from left to right. With a dry & rub a clean cloth or paper.Note: Always test surfaces for alkali resistance. Do not allow to dry, do not use in direct sunlight, hot and matte surfaces must first be moistened with water.
Radiator Stop Leak
Attribute
Description
Product description:
Bardahl Radiator Stop Leak is designed to stop leaks in the cooling system. It combines sealants, corrosion inhibitors and anti-scale ingredients to effectively stop leaks in the radiator, hoses, heater, water jacket and cylinder head.
The Problem:
Lowering coolant levels and leaks in the cooling system can lead to overheating and other engine problems. Bardahl Radiator Stop Leak offers a solution for small leaks and cracks in the cooling system.
The Operation:
Scientific combination of filling, sealing and guiding to combat leaks. Seals holes and cracks and hardens on contact with air, creating a durable and flexible seal.
Benefits:
Seals holes and cracks in the radiator, lubricates and protects the cooling system and softens parts.
Product information:
Item number: 14001, Contents: 300 ml.
Instructions for use: Shake the can well. Pour the contents into the radiator. Let the engine idle for 10 minutes or drive with the heater on high. For larger cooling systems or leaks, use two cans. For maximum results, first rinse with Bardahl Radiator Fast Flush.