Bodycoating white
| Product number: : 63451 |
|---|
| Bardahl Bodycoating is a coating based on synthetic resins and rubbers. Bardahl Bodycoating is available in black, white and gray. |
Tailored Advice
Bodycoating white
| Attribute | Description | |
|---|---|---|
| Specially Developed Coating: | Bardahl Body Coating is a high-quality coating based on synthetic resins and rubbers, designed for stone chip protection of body parts such as spoilers, door sills and sides. | |
| Quick-drying and Elastic: | This fast-drying formula forms a closed, elastic film that provides excellent protection against rust and stone chips, with a recommended layer thickness of approximately 1mm. | |
| Excellent Adhesion: | Provides excellent adhesion and can be repainted with any type of paint system without the risk of bleeding through, compatible with synthetic resin paints as well as 2K and nitro paints. | |
| Tixotropic Properties: | The thixotropic properties ensure that the product can be applied without dripping, which guarantees a neat and efficient application. | |
| Packaging and Handling: | Packed in 1 liter screw-on bottles, available in white, gray and black. The optimal working pressure for application is 3-5 bar. | |
| Analysis and Test Data: | Density at 20°C is 1.04 kg/l, viscosity 8000 +/- 2000 cP. The coating has a solids content of 44-47% and has been tested in a salt spray test for 200 hours. |
Instructions for use:
Shake the can well before use. Apply at room temperature on clean and dry surfaces. Cover areas not to be treated. Can be diluted with white spirit. Pressure: 3-8 bar. Clean the spray gun carefully after use. There is a chance that the bus will explode due to clogged nozzles.
Gerelateerde producten
Bodycoating Grey
Attribute
Description
Specially Developed Coating:
Bardahl Body Coating is a high-quality coating based on synthetic resins and rubbers, designed for stone chip protection of body parts such as spoilers, door sills and sides.
Quick-drying and Elastic:
This fast-drying formula forms a closed, elastic film that provides excellent protection against rust and stone chips, with a recommended layer thickness of approximately 1mm.
Excellent Adhesion:
Provides excellent adhesion and can be repainted with any type of paint system without the risk of bleeding through, compatible with synthetic resin paints as well as 2K and nitro paints.
Tixotropic Properties:
The thixotropic properties ensure that the product can be applied without dripping, which guarantees a neat and efficient application.
Packaging and Handling:
Packed in 1 liter screw-on bottles, available in white, gray and black. The optimal working pressure for application is 3-5 bar.
Analysis and Test Data:
Density at 20°C is 1.04 kg/l, viscosity 8000 +/- 2000 cP. The coating has a solids content of 44-47% and has been tested in a salt spray test for 200 hours.
Instructions for use:Shake the can well before use. Apply at room temperature on clean and dry surfaces. Cover areas not to be treated. Can be diluted with white spirit. Pressure: 3-8 bar. Clean the spray gun carefully after use. There is a chance that the bus will explode due to clogged nozzles.
Body Coating Black
Contents:
500 ML
Attribute
Description
Specially Developed Coating:
Bardahl Body Coating is a high-quality coating based on synthetic resins and rubbers, designed for stone chip protection of body parts such as spoilers, door sills and sides.
Quick-drying and Elastic:
This fast-drying formula forms a closed, elastic film that provides excellent protection against rust and stone chips, with a recommended layer thickness of approximately 1mm.
Excellent Adhesion:
Provides excellent adhesion and can be repainted with any type of paint system without the risk of bleeding through, compatible with synthetic resin paints as well as 2K and nitro paints.
Tixotropic Properties:
The thixotropic properties ensure that the product can be applied without dripping, which guarantees a neat and efficient application.
Packaging and Handling:
Packed in 1 liter screw-on bottles, available in white, gray and black. The optimal working pressure for application is 3-5 bar.
Analysis and Test Data:
Density at 20°C is 1.04 kg/l, viscosity 8000 +/- 2000 cP. The coating has a solids content of 44-47% and has been tested in a salt spray test for 200 hours.
Instructions for use:Shake the can well before use. Apply at room temperature on clean and dry surfaces. Cover areas not to be treated. Can be diluted with white spirit. Pressure: 3-8 bar. Clean the spray gun carefully after use. There is a chance that the bus will explode due to clogged nozzles.
Intercoating ML Amber
Contents:
500 ML
Attribute
Description
Anti-corrosion Properties:
Bardahl Intercoating ML offers effective corrosion protection for cavities in car bodies such as doors and box beams, thanks to its composition with basic raw materials that penetrate strongly.
Penetration and Protection:
Specially developed to treat hard-to-reach bodywork parts, creating a dry, non-adhesive film with a layer thickness of 20-40 microns.
Temperature resistance:
The film is amber-colored, transparent and has excellent temperature resistance, allowing protection of the trunk lid and hood.
Versatility:
In addition to application on car bodies, Bardahl Intercoating ML can also be used for the protection of metal parts, surfaces and tools during storage and transport.
Processing:
Available in 1 liter screw-on bottles, suitable for processing with ML spray guns.
Analysis data:
Density at 20°C: 0.86 ± 0.02 Kg/l, Viscosity: 30 ± 5 sec, Flash point: >39°C, Salt spray test: 200 hours according to DIN 50021.
Available Packaging:
Available in 500 ml (spray), 1 liter, and 5 liter packages, to meet different usage needs.
Instructions for use:Cover the surface not to be treated with paper. Shake the can well. Spray at room temperature from a distance of 30-40 cm. Spray in thin layers. After use, turn the can over and flush until only gas escapes, this cleans the spray cap. Bardahl Intercoating ML can be easily removed with white spirit, making maintenance and cleaning easy.