Oils and maintenance for your boat

Attribute Description Disinfectant Properties: Bactericidal, fungicidal (anti-fungal) and virucidal (anti-virus) action for optimal hand hygiene and limitation of micro-organism transmission. WHO Recommended Wording: Hydroalcoholic solution containing 83.3% denatured ethanol, 1.45% glycerin, 0.25% hydrogen peroxide and 14.97% water. Standard compliance: Conforms to European standards for bactericidal (EN 1276), fungicidal (EN 1650) and virucidal (EN 14476) activities. Safety recommendations: For external use only; avoid contact with eyes and keep out of reach of children. Quality and Storage: Shelf life of 24 months in original, unopened packaging. Store at room temperature, protected from light and moisture. Item number and Contents: Article number 3833, available in 5 liter packages. Instructions for use:Fill the palm of your hand with the solution and rub over all surfaces until the skin is dry.

Attribute Description Multi Functional: Disinfectant suitable for use on various surfaces such as metal, plastic and fabric. Efficient and Economical: Designed for cost-effective and efficient use, minimizing the amount required for maximum effectiveness. Antibacterial and Antifungal Properties: Contains properties that combat bacteria and fungi, in accordance with EN 1276 and 1650 standards. High Ethanol Content: Contains more than 70% ethanol for powerful disinfection. Versatile Cleaning: Suitable for cleaning handles, doors, desks, floors and more, leaving a pleasant perfume. Specific Applications: Developed for use on many surfaces but not suitable for polyacetate cellulose, artificial leather and nubuck. Item number and Contents: Item number 3861, package of 500 ml. Instructions for useTurn off electrical appliances, test the product on a small surface, shake the spray before use, and apply to a microfiber cloth to disinfect surfaces. div>

Bardahl NAUTIC Motor Oil 15W30 is a motor oil that has been specially developed for modern and (very) fast 4-stroke inboard engines, both petrol and diesel engines with or without turbo. The extensive package of additives, in combination with the best base oil, provides maximum protection against friction and wear and prevents the formation of black sludge. This engine oil enables long drain intervals and the friction-reducing additives ensure lower fuel consumption. Category Description Specification API Service SL/CI-4/CH-4/CG-4 | MAN: 271 | MTU: Type 2 | Volvo: VDS2/VDS3 | Cummins: CES20076-77/20078 | Deutz: DQC0305 | Caterpillar: ECF-1A. Suitable for: Modern and very powerful 4-stroke inboard engines (petrol and diesel) with or without turbo, recommended for faster pleasure boats.

Attribute Description Purity: Demineralized water is water in its purest form, stripped of all salts, lime and chloride minerals that are usually present in small quantities in tap water. Applications: Suitable for refilling batteries and humidifiers. However, it is not intended for medical purposes and is not suitable for consumption. Item and Packaging Information: Item number 84055, capacity 5 liters. Item number 84083, capacity 25 liters. Item number 84092, capacity 210 liters.

Bardahl NAUTIC Motor Oil 10W30 is a high-quality motor oil suitable for 4-stroke outboard engines that require 10W30. The very extensive package of additives, in combination with the latest base oil, ensures maximum protection against friction and wear under the most diverse conditions. Anti-rust and anti-corrosion properties protect engine components against moisture damage through a unique anti-wear package based on molybdenum/zinc technology. Finally, this motor oil contributes to saving fuel consumption and ensures minimal emissions. Category Description Specification API - SJ | API-SL | NMMA - FC-W. Suitable for: Bombardier, Sea-Doo, Evinrude, Johnson, Yamaha, Suzuki, Mercury.

A shower and shampoo with a friendly odor. dermatologically tested

ApplicationBardahl longlife Cooling Fluid -38°C G12+ offers superior engine protection with its advanced Organic Acid Technology (OAT), ensuring long-lasting defense against frost and corrosion for over 700,000 km or 8,000 hours. This eco-friendly, silicate-free formula is designed for modern engines, providing enhanced heat transfer and cavitation protection while being compatible with major vehicle brands. It's the preferred choice for maintaining optimal engine performance with minimal maintenance.

Attribute Description High Pressure Resistance: A tight lubricating film on the material with exceptional high-pressure properties, promoting lubrication under extreme conditions. Water Repellency: Excellent water-repellent properties, resistant to degradation by water or steam, ideal for use in humid environments. Corrosion resistance: Provides a lubricating film with exceptional anti-corrosion properties, suitable for use in various environmental conditions. Low Freezing Point: Low freezing point allows lubrication of machines and equipment working in the open air, effectively even in cold climates. Energy savings: Leads to lower energy consumption through reduced friction, resulting in more efficient device operation. Sustainability and Efficiency: Reduces the need for frequent oil changes by delayed lubricant aging, allowing for longer lubrication intervals. Packaging and Contents: Available in a easy to use small package, item number 53001, contents 100 ml, suitable for specific applications and smaller devices. Instructions for use Make sure the machine or device is turned off and disconnected from any power source. Clean the targeted parts of dirt or old lubricant. Shake the Bardahl Precision Oil container well and then apply a few drops to the necessary mechanical parts, using a nozzle or extension tube for hard-to-reach areas. Reconnect the power source and run the machine briefly to distribute the oil evenly. Regularly inspect the lubrication level and reapply Bardahl Precision Oil if necessary. Store the oil in a cool, dry place, away from direct sunlight and ensure that the empty container is disposed of properly, in accordance with local regulations. 

Classic Bardahl sticker rectangle 125mm x65 mm

Attribute Description Applications and Operation: Bardahl BD-50 Multi-Spray is a versatile penetrating oil that displaces moisture, lubricates parts, dissolves rust, cleans, and protects against further corrosion. Suitable for ignition systems, tools, hinges, and more. Unique Composition: Contains a blend of high-quality oils and special additives that create a durable lubricating film that adheres to metal, reducing friction and wear. Water and Moisture Resistance: Thanks to its unique composition, the BD-50 Multi-Spray adheres even under water or in humid conditions, providing long-lasting protection. Creeping Properties: Thanks to special organic components, the product reaches even the smallest openings, while dissolving old deposits of gum, varnish and dried lubricants. Protection against Rust and Corrosion: Contains anti-rust and corrosion ingredients that prevent further rust formation and reduce oil oxidation caused by high temperatures or moisture. Packaging and Contents: Available in 200 ml and 400 ml aerosol cans, making it easy to use and suitable for various applications. Instructions for useSpray onto the surface to be treated. If necessary, repeat the treatment in persistent cases. Do not wipe. Safe for paint, rubber and plastic. When parts are reassembled, it is recommended to spray them with the product to prevent rusting again.

Attribute Description Fast and Effective Cleansing: Bardahl Multi Parts Cleaner quickly and effectively removes brake fluid, grease, oil, tar and other contaminants from electrical and clutch parts. Unique Wording: The unique electrically conductive (anti-static) formulation makes it safe for use in workshops where sparking may pose a risk. No Residue: Evaporates quickly and leaves no residue, dissolves stubborn and hardened dirt. It displaces moisture and dries quickly. Wide Applications: Suitable for cleaning brake linings, lines, brake drums, cylinders, discs, pads, clutch, transmission, and more without dismantling brake units. Benefits: Extends brake life, ensures shorter braking distances, reduces noise and can also be used to remove preservatives. Available Packaging: 600 ml (Article number 78106), 5 liters (Article number 78155), 25 liters (Article number 78182), 60 liters (Article number 78186). Instructions for useSpray the parts liberally, allow to work and dry with compressed air or a soft cloth. Repeat if heavily soiled. Canister filled with environmentally friendly gas.

Enrich your Bardahl collection with the Bardahl Racing Premium Black Cap, a combination of classic style and comfort. Crafted from 100% high-quality cotton, this cap promises durability and a breathable fit. The structured six-panel design offers a modern look, while the contoured sandwich peak offers a sporty aesthetic and protects your eyes from the sun. An adjustable closure ensures a secure and comfortable fit for everyone. The cap is distinguished by the striking Bardahl Racing logo, which shows your passion for the brand and motorsport. Whether you're at the track or enjoying a casual day out, this cap is the perfect accessory for fans and enthusiasts.

Diesel Antifreeze prevents freezing of diesel. Add this Cold Flow additive to the diesel when temperature is above 5°C. Suitable for all types of diesel: B7 / biodiesel / premium blends / GTLDiesel Antifreeze prevents cold starting problems and corrosion resulting from paraffin wax crystals, dirt or water in the diesel fuel. Cleans the fuel system and improves combustion. It contains a wax crystal modifier, which has proven its performance in diesel fuels worldwide. Tests have shown that this diesel additive will significantly modify flow characteristics of diesel fuel at low temperatures. This cold flow additive was tested under field conditions to see if it could prevent filter and fuel line blockage when added to diesel fuels. Failure in these tests was defined as clogging of fuel lines or filters with wax crystals so as to prevent normal engine operation. Bardahl Diesel Antifreeze lowers the flow point of diesel fuels, allowing engine operation a fuel storage when temperatures remain below freezing for extended periods. Use of Diesel Antifreeze will help prevent fuel from solidifying in fuel lines, tanks, and filters. This action helps to eliminate costly thawing producers and engine damage due to fuel starvation. Bardahl Diesel Antifreeze comes in a concentrated version. Designed to treat most fuels at a ratio of 1 liter Antifreeze per 1000 liter fuel or a ratio of 1 liter per 500 liter of fuel. The most efficient treatment ratio for a particular fuel may vary, depending upon crude source and wax content. When adding to a vehicle fuel tank it is recommended that the additive is pored into a partially filled tank (i.e. approximately quarter full). The fuel tank should then be filled with fuel. Attention The additive must be added when the fuel is at least 5°C above its cloud point. Always read the instructions on the label before you add the product. Do not add more than prescribed times, this can have a detrimental effect.

Attribute Description Product Description: Bardahl Liquid Soap is a lotion with good, mild cleaning properties, specially designed for light soiling of the hands. Applications: Suitable for use after office and administrative work or warehouse work such as packing boxes. Properties: This lotion is pH neutral and contains no silicones, making it gentle on the skin and suitable for frequent use. Available Packaging: Available in 500 ml (Art. No. 60405) and 5 liter (Art. No. 60455) packages, suitable for both personal and professional use.

Bardahl Nautic Super Outboard TCWIII Motor Oil is a two-stroke oil with a higher quality than recommended by the leading manufacturers of outboard motors. It exceeds the lubrication requirements of water-cooled outboard engines and air-cooled engines that are heavily loaded and have to run at high speed for long periods of time. Bardahl Nautic Super Outboard TCWIII Motor Oil meets the strict lubrication regulations as established by the National Marine Manufacturer's Association and the Boating Industry Association: NMMA/BIA TC-W3. Category Description Specification NMMA - TC-W3 | OMC - 40/70 Suitable for: All two-stroke engines that require an ashless oil, such as outboard motors, snowmobiles, jet skis and two-stroke snow plows. Also suitable for lawn mowers, trimmers, leaf blowers, chainsaws and motorcycles.

The exclusive BARDAHL POLAR PLUS - Fullerene C60 formula forms a triple protective layer. The excellent anti-wear and anti-foam EP properties provide a perfect lubrication and excellent protection of gears under the most severe conditions. Note: Follow the manufacturer's instructions at all times, which can be found in your service book.

Attribute Description Natural Ingredients: Bardahl Leather Cream is a mix of natural lanolin and waxes that optimally protects your leather interior. Nutrition and Protection: Nourishes the leather to keep it supple, soft and shiny. Also protects against dirt by applying a protective layer. Wear reduction: Makes the leather soft, which reduces the chance of hairline cracks or cracks in the paint layer. Application advice: Do not use on suede. Suitable for regular maintenance of your leather interior. Product specifications: Item number: 60902, Contents: 200 ml. Instructions for use:Clean the lining, shake the bottle, apply with a dry cloth, allow to absorb and rub out. Regular use keeps leather in top condition.

Attribute Description Waterproof Protection: Provides maximum protection against moisture, dirt, acid rain and more, suitable for applications such as fabric convertible tops, tents, tarpaulins, awnings, jackets and shoes. Easy Maintenance: Facilitates the removal of tree sap and bird droppings, making cleaning easier. Improved Fabric Condition: Regular impregnation extends the lifespan and improves the condition of fabrics, makes them water-repellent and maintains their quality. Safe for Various Materials: Does not attack paint, chrome, glass and plastic. Contains a high-quality UV filter system to prevent fading and aging of materials. Available Packaging: Available in 400 ml spray, ideal for periodic use and easy application. Instructions for use: Shake well before use and apply to a clean and dry surface. Apply a thin layer, repeat 2 to 3 times, wait 10-15 minutes each time and let it dry for several hours. Remove overspray from windows and paint with a microfiber cloth. This product can be applied in the sun, which shortens the drying time. Repeat the treatment after a few months, then apply 1-2 thin layers. After impregnation with Bardahl Waterproof Spray, dirt such as tree resin and bird droppings can be removed more easily. Regularly impregnating a fabric roof, tarpaulin, jacket, etc. extends the lifespan and improves the condition of the fabric and makes it water-repellent. Does not affect paint, chrome, glass and plastic.

Discover the style and comfort of the Bardahl Premium Black T-shirt. Available in sizes M to XXL, with a tight fit. The high-quality material ensures durability. Ideal for both casual and professional settings.

Attribute Description Multifunctional Use: Bardahl Super Spray serves as a penetrating oil, lubricant, moisture remover, anti-corrosion spray and parts cleaner. Reduction of Friction and Wear: Effectively reduces friction and wear, loosens rusted parts and provides a protective lubricant film. Protection against Rust and Corrosion: Provides strong protection against rust and corrosion, essential for machine tools and industrial machines in harsh environments. Advanced Formulation: Contains a blend of organic ingredients with excellent creeping action and high-quality oils with Bardahl's 'polar attraction' formula. Technical Specifications: Temperatures from -39°C to 150°C, Flash point >61 °C, Density 1.099 g/cm³, Viscosity >20 mm²/s, Timken test >300 pnds. Application methods: To be sprayed on rusted parts; repeat for persistent cases. Immersing parts in bulk packaging possible for thorough treatment. Available Packaging: Available in 1 liter and 5 liter packages, suitable for various applications. Instructions for useThe product should be sprayed onto rusted, dirty or stuck parts . For persistent cases, the treatment can be repeated. When the parts are reassembled, it is recommended to spray them with the product to prevent rusting again.

Attribute Description Versatile Cleaner: Bardahl Foam Cleaner is suitable for cleaning fabric upholstery, plastic, carpet, carpet, windows, mirrors, headlights and more. Deep Cleansing: Cleans deep into the fibers and removes stubborn stains such as oil, ink, soot, wax, nicotine and grease, while refreshing the colors. Applicable to Various Surfaces: Suitable for glass, ceramic materials, tiles, metal, concrete and painted surfaces. Available Packaging: Available in 500 ml packaging, ideal for domestic and industrial use. Instructions for use Spray this product on, let it sit for a few minutes and then rub it out with a cloth. Repeat action for moderate to heavy contamination.

Attribute Description Versatility: Bardahl Silicone Spray Lube is a multifunctional lubricant suitable for cars, home or office. It lubricates and protects plastic, rubber, metal and other surfaces. Sustainability: Resists washing, melting, freezing and dries quickly without sticking or staining. Corrosion protection: Delays rust formation and protects against saltwater corrosion, ideal for use in harsh environmental conditions. Specific Applications: Lubricates components such as car locks, hinges, and expels moisture in vehicle electrical systems. Protects sporting goods, garden tools and more. Rubber maintenance: Keeps rubber parts supple, protects against drying out and does not freeze at temperatures down to -40°C, ideal for winter conditions. Temperature resistance: Withstands temperatures from -40°C to +200°C, suitable for extreme climatic conditions. Pack size: Available in a 400 ml spray can, useful for both professional and personal use. Instructions for useSpray the product from a distance of 30 cm onto a clean and dry surface.

Bardahl Marine oil 15W40 is a modern engine oil for 4-stroke inboard engines. This motor oil contains an extensive package of additives that protect against friction and wear and prevent the formation of black sludge. Bardahl Marine oil 15W40 is suitable for inboard engines (diesel or petrol) with or without turbo. Recommended for recreational craft under normal use. Category Description Specification API Service SL/CG-4. Suitable for: Deutz, Iveco, Perkins, Yanmar, Lombardini.

Bardahl NAUTIC Gear Oil 75W90 GL5 is a semi-synthetic transmission oil for in- and outboard gears and transmissions (both straight and bevel gears). This transmission oil has been specially developed to meet the most stringent requirements in pleasure boating. This transmission oil offers maximum protection against wear and corrosion. Category Description Specification API - GL-4 | API - GL-5 | MIL - L-2105 D Suitable for: Tailpieces and transmissions (both straight and bevel gears) of pleasure craft, suitable for high temperatures and heavy loads.